Technical Specifications

NES MOVer Sit & Ride TANK CLEANING Kit

Vehicle

  • Track length :1420mm
  • Track width :230mm
  • Track height :330mm
  • Total width assembled :1105mm
  • Total length with blade :2420mm
  • Number of assemblies for passing manway :9
  • Total weight assembled :550kgs
  • Drive :2 hydraulic motors with integral gearboxes
  • Controls :Hand proportional valves with centre detent
  • Tracks :Continuous Nitrile rubber self tensioning
  • Blade :UHMW Plastic with brass backing plate
  • Assembly fixings :Pins/slot-in/quick release couplings
  • Speed :Variable 0 to 40m/min

Specification of NESL ROTARY LOBE PUMPS & HYDRAULIC POWER PACKS

NESL 640-140 Lobe Pump

NESL 670-270 Lobe Pump

Max Flow-84m3/h Max Pressure 6.2 Bar

Max Flow-162m3/h Max Pressure 6.3 Bar

Suction inlet-4"/100mm Discharge-4"/100mm

Suction inlet-6"/150mm Discharge-6"/150mm

Drive-Hydraulic Motor Max Speed 540RPM

Drive-Hydraulic Motor Max Speed 540RPM

Mounting-4 wheeled trolley

Mounting-4 wheeled trolley

Control- Hydraulic valve Forward/Reverse/Stop

Control- Hydraulic valve Forward/Reverse/Stop

Dimensions-720 X 274 X 463 Weight 154Kgs

Dimensions-873 X 274 X 463 Weight 194Kgs

Number of Lobes-4 Materiel-Nitrile Rubber

Number of Lobes-8 Materiel-Nitrile Rubber

NESL 402A Hydraulic Power Pack

NESL 402B Hydraulic Power Pack

Engine- Iveco 804I 4 cyl diesel water cooled

Engine- Iveco 8065 E 6 cyl diesel water cooled

Power(intermittent)-56KW@2500rpm

Power(intermittent)-84.5KW@2500rpm

Power(continuous) -50.5KW@2500rpm

Power(continuous) - 76KW@2500rpm

Displacement 3.9 l - 12v electrics

Displacement 5.9 l - 12v electrics

Pump- 134 l/m @ 250 Bar

Pump- 134 l/m @ 250 Bar load sensing pressure compensated

Mounting Protection Frame with lifting point

Mounting Protection Frame with lifting point

Fuel and Hydraulic Tanks- incorporated

Fuel and Hydraulic Tanks- incorporated

Full instrumentation and controls fitted

Full instrumentation and controls fitted

Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection

Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection

Use- NES Mover + NES 670 or 2 X NES 640

Use-NES Lagooner + NES 670 or 2 X NES 670

NESL 402C Triple Hydraulic Power Pack

NESL 405A Mobile Hose Reel

Engine- Iveco 8065SE00 6 cyl diesel water cooled

Number of reels 2 (1-supply to vehicle 2- supply to Lobe pump)

Power(intermittent)-119.5KW@2500rpm

All steel construction frame with lifting point

Power(continuous) - 104KW@2500rpm .max125KW

Length of Umbilicals 300 feet fully sheathed  with QR couplings including air line for Mover operator

Displacement 5.9 l - 12v electrics

Extension hoses to Power pack 2 X 50 feet with QR couplings

Pump- 223 l/m @ 250 Bar

Variable displacement on demand pressure compensated

Mounting Protection Frame with lifting point

NESL 405B Triple Mobile Hose Reel

Fuel and Hydraulic Tanks- incorporated

Number of reels 3 (for any combination of 3 pumps/vehicles

Full instrumentation and controls fitted

All steel construction frame with lifting point

Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection

Length of Umbilicals 300 feet fully sheathed 

Use-NES Lagooner + 2 X NES 670 or 3 X NES 670

Extension hoses to Power pack 2 X 50 feet with QR couplings

 

The above are all standard NES package Kits, any special requirements are not included. For special requirements details should be given to our technical sales department for evaluation and costing.

Specifications are liable to changes without notice

 

copyright 1996-2010 by Non Entry Systems Ltd (NESL)